Wicked Lights A67iC 3-Color-In-1 Night Hunting Ergo Scan Light Flashlight Kit for foxes, coyotes, hogs W2022

Wicked Lights Patented Long Range A67iC 3-Color-In-1 (Red, Green, and White) Hog and Predator Hunting Ergo Scan Flashlight Kit.

THE A67iC 3-Color-In-1 NIGHT HUNTING SCAN FLASHLIGHT KIT INCLUDES:

• 1 x A67iC 3 Color In One Full Intensity Control Light with Patented Center Axis Rotary System
  • Includes 3 center axis LED's in one light (1 x  Green, 1 x Red, 1 x White) - see details below! 
• 1 x Ergo Grip with Internal Battery Storage Compartment for Scanning
• 2 x Li-Ion Rechargeable Batteries
• 1 x 2-Position Charger with A/C & DC charge adapter
• 1 x Intensity Controlled Standard Rheostat Cap
• 1 x Rubber Halo Shield
• 1 x Hard-sided Storage and Carry case
• Instruction manual
• Limited Lifetime Warranty

Protected by US Patent 9,951,928, 10,208,924, & 11,028,998

The A67iC Ambush Hog & Predator hunting light features patented Center Axis Rotational 3-in-1 Selectable Color LED module with LED Position Detent Lock, Zoom/Focus, and Full Intensity Control.

 Key Design Feature 1:

The first key feature is the revolutionary, Patented 3-in-1 Center Axis Rotational Color LED module with LED Position Detent Lock. In laymen’s terms, you have the ability and convenience to select any of the 3 colors (for example Red, Green, or White) with just a slight twist of a knob and have the LED color of your choice lock in place on the center axis of the light body and in the center axis of the spherical lens.

Why is the “center axis” so important you may wonder? First, if the LED is not centered in the center axis of the spherical lens, then the light will not reach its maximum potential in light output (as measured in LUX). Depending on how far off axis the LED is, it will also create an artifact or distortion in the light beam which can affect your field of view when looking through a scope. With the A67iC Ambush Light you can effortlessly select and change LED colors with a quick turn of the LED color control knob. The patented Center Axis Rotation design virtually eliminating the need to perform windage and elevation adjustments to keep the light beam centered in the scope field of view when changing colors.

With the A67iC Ambush Light’s effortless and quick LED color selection ability, you will gain the ability to tailor your LED color to the particular target species, terrain, or climatic conditions like many expert night hunters do. 

Key Design Feature 2:

Full Intensity Control--Why do I need Intensity Control? Intensity control allows you to adjust the intensity based on the situation. The Intensity Control rheostat knob allows the hunter to increase the brightness until they have just enough light to make positive identification. This eliminates the worry of putting too much light on the animal because the hunter can stop increasing the brightness of the light at any time. By using the Intensity Control feature to start on low, then conditioning the animal with a gradual increase in brightness, and stopping when there is just enough light; the hunter will spook less animals, period!

Key Design Feature 3:

Zoom Focus Rotating Bezel. The ability to adjust the light beam characteristic from “flood” to fully focused “zoom” is critically important. This allows the user to widen the beam for scanning or tighten it down to a spot for long range identification.

A67iC 3-in-1 Specifications:

• Patented Center Axis 3-Color-in-1 Selector System ( Protected by US Patent # 9,951,928 and additional Patent pending.)
• Operation temperature: Minus -30 ~ 120 degrees Fahrenheit.
• Precision machined T6 Aircraft grade aluminum with type III hard anodization.
• O-ring sealed, water resistant.
• Battery type: Operates on 1 18650 PCB 3.7V Lithium-ion battery.
• A67iC Bezel Diameter: 67.55 mm / 2.655 inches.
• A67iC Body Diameter @ scope mount: 25.0 mm / 1.0 inch.
• A67iC Weight one battery installed: 15.7 ounces.
• A67iC Length: 215.0 mm / 8.5 Inches.
• A67iC Length bezel extended to MAX zoom: 222 mm / 8.75 Inches.
• Warranty: Limited Lifetime on light housing. LED and internal electronics, three years. Accessories, batteries and charger, grips, etc. one year. See manual for details and limitations.
• The A67iC features a full intensity control tail cap with the ability to power the light on at any desired intensity level.
• The A67iC comes with Green, Red, and White LED's. The LED assembly is built into a center axis rotational device, allowing the user to instantly change the LED color with the twist of a knob without losing zero in your scope for those wishing to use or experiment with a diffident led color.
  

*Approx battery life using high quality, fully charged, Tenergy 18650 3.7 Li-Ion 2600ma battery.

**Ambient light (moon phase), scope quality & power setting, LED color, battery state of charge, background foliage, rain, snow, and size and color of target species will all affect range.

***Manufacturer specifications are subject to change without notice.